Common Carpet Cleaning Service Techniques
You should consider all options when choosing a carpet cleaning company full article. You can clean your floors with regular vacuuming and quick stain treatment, but a deep cleaning service is recommended to make sure your floors look new.
These are some common cleaning methods for carpet cleaners:
This process is also known as steam cleaning. The machine sprays hot detergent onto the surface, then vacuums it up immediately. Professional companies will be careful with how much water they use. The padding underneath could become soaked if too much water is applied. This can lead to mold and mildew problems. It can attract more dirt if too much detergent is used or not properly removed.
This method takes longer to dry than other methods. You can speed up drying by opening windows and using fans.
Extraction by Dry- or Foam Method
A powdered detergent is used for dry extraction. The powdered detergent is then brushed into the fabric using special machines that stir it into the fibers. Dust and dirt in fabric bonds to dry chemicals. This can be cleaned by vacuuming. Pre-treating stains with a spray can be helpful. You must vacuum out all powder. It can cause it to stick to clothes and shoes later. Because there is no drying time, this is a very popular option.
Foam extraction can be done with hot water. The fabric is then applied with a foam compressor. The foam is combed through by a rotating cylindrical brush. After dirt and dust have adhered to the foam, vacuum it while it’s still damp. To ensure that dirt is removed completely, vacuum the area before and after using this technique. This method may take longer to dry.
This method allows a cleaning agent to be pushed into the fibers using a rotating brush machine. The solution becomes a foam-like substance that can be cleaned by using wet vacuuming. This method is discouraged by carpet manufacturers due to the possible damage that brushes can cause to the fibers. This is another method that uses water, so drying times can be long. It can cause shrinkage or odor if the surface is too wet.
An absorbent pad is made by spraying a solution onto the surface. The chemicals are allowed to penetrate the fibers and move dirt to the surface. A machine equipped with a large spinning pad that is absorbent and able to remove the chemicals from the surface is used. It looks very similar to a commercial floor buffer. This method should only be used by professionals. The carpet may become puckered if it is done incorrectly.
One or more methods may be offered by a carpet cleaning company. Each one has its own advantages and disadvantages. They’ve all been around for a long time. Any of these methods can be used on any surface if done correctly. Ask for advice from several companies on the best method to suit your needs.
Ultra Brite Carpet & Tile Cleaning North Shore
79-83 Longueville Road, Lane Cove NSW 2066
(02) 8015 5143